DeWalt

 

• High efficiency motor delivers 450 unit watts out of max power for superior performance
• Also has a LED light with 20 second delay after trigger release Batteries not included
• Uses DEWALT 20Volt Max lithium ion batteries which offer longer run time and enhanced durability
• Heavy duty 1/2 Inch metal ratcheting chuck with carbide inserts
• Kit includes drill and 360 degree side handle 3 speed all metal transmission
• Battery & Charger Sold Separately
• Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18

 

 

• Access: The 72 tooth ratchet allows for a 5 degree arc swing allowing for greater access in tight spaces
• Durability: The set comes in a durable blow mold case, keeping your tools safe in your house or garage
• Comfort: The anti slip screwdriver provides maximum comfort during use
• Design: Sockets and box end wrenches incorporate DEWALT Direct Torque technology, allowing for greater contact with fasteners and greater torque to make tightening and loosening easy
• Variety: This set comes with an array of sockets, wrenches, accessories and specialty bits, great for a variety of uses

 

 

• 1700 in-lbs. Of torque delivering the power you need to get a majority of applications done
• Variable speed trigger allows for control and precision on delicate work surfaces
• DEWALT built Brushless motor for efficient performance and runtime
• 3 bright LEDs for dimly lit workspaces
• battery-powered

 

 

• 13 amp motor / 9,000 RPM
• Dust ejection system technology to protect the tool from damaging dust and debris
• 4.5" type 27 guard, 5" type 27 guard, 6" type 27 guard
• Trigger switch (no trigger lock)

 

 

• Brushless motor provides runtime and efficiency to get the job done
• Variable speed control from 8, 000 – 12, 000 OPM to match the speed to the application.
• Low profile height allows user to get close to work surface for precise sanding.
• Replaceable 8-hole hook-and-loop sanding pad (DW64233) for quick, easy paper changing.
• Dust-sealed switch to protect against dust ingestion for long switch life.

 

 

• Variable Speed Trigger allows for increased control over the flow of your adhesive
• Variable Speed Dial allow for setting maximum and minimum flow rates
• Anti - Drip Feature automatically retracts the plunging rod preventing excess adhesive from dripping out
• Quick Connect Inter-changeable canister trays allows user to quickly change between canister sizes
• Cordless, maximum speed 21 inches per minute, weight 4.66 pounds, battery and Charger sold separately
• Battery & Charger Sold Separately

 

 

• 26,000 RPM motor delivers fast cutting in drywall, acoustical ceiling tiles, plywood, etc.
• Tool-free for fast and easy bit changing without a wrench
• Dust-sealed switch protects against dust ingestion for longer tool life
• Bright LED light illuminates dark work surfaces for accurate cutting
• Slim, lightweight design. Collet Diameter ¼ IN, 1/8 IN IN
• Battery & Charger Sold Separately

 

 

• Deep laser etched markings for Easy socket size identification
• 5 Degree arc swing and slim head Design
• 72 Tooth gear system for high torque ratcheting
• Low profile directional lever
• Easy one hand operation

 

 

• Compact and lightweight design
• Fits between studs and allows users to make cuts in confined spaces
• 4-Position Blade Clamp allows for flush cutting
• 1-1/8" stroke length delivers faster cutting speed
• Variable Speed Trigger with 0-2,900 spm
• Battery & charger sold separately

 

Authorized Distributor Includes All Documentation and Support.

 

• Dcf601 12V max Brushless 1/4 in. Screwdriver is 23% shorter
• Brushless motor for maximum runtime and durability
• 1/4 in. Quick release drop and load hex that accepts 1 in. Bit tips
• 15 clutch settings for a variety of fastening and drilling applications
• 3 LED lights on nose for illumination onto work surface

 

 

• Table 1-compliant dust management solution for 1 in. Sds Plus rotary Hammers
• 2-Second power off delay ensures dust extraction to continue after drill is switched off
• Clear, durable dust box ensures users can see when dust box needs to be emptied
• Built-in motor increases suction and high tool performance
• Replaceable dust nozzle to quickly change to new nozzle

 

 

• Dcd771 20 Volt max Lithium Ion 1/2 In compact drill driver delivers 300 unit watts out (UWO) of power to complete a wide range of applications
• Dcs381 20 Volt max Lithium Ion reciprocating saw with keyless blade Clamp allows for quick blade changes without touching blade or reciprocating shaft
• Dcs393 20 Volt max Lithium Ion circular saw with 6 1/2 In Carbide blade can cut 2 feet x 4 feet at a 45 degree angle in a single pass
• Dcs355 20 Volt max Lithium Ion Oscillating tool quick change accessory system allows blades and attachments to be changed quickly without wrenches
• DCG412 20 Volt max Lithium Ion 4 1/2 In grinder with 7000 RPM motor provides high power for cutting and grinding applications

 

 

• Dewalt Brushless Motor which delivers up to 57 percent more run time
• Compact, Lightweight Design for tight spaces
• High speed transmission with 2 speed settings
• 3 Mode LED lights with a spotlight mode
• Battery and charger sold separately
• Maximum initial battery voltage (measured without a workload) is 20 volts; Nominal voltage is 18
• MAX Power: 460 UWO

 

 

• Power and Durability: 15 Amp, 4,000 Rpm Motor
• Miter Detent Plate Improves Productivity and Ensures Cutting Accuracy: Adjustable Stainless Steel Miter Detent Plate with 14 Positive Stops
• Miter Dentent Override That Allows You to Override the Miter Stops and Adjust to the Desired Setting Without the Saw Slipping into the Miter Detents. Arbor Size Is 5/8 Inches
• TALL SLIDING FENCES that support crown molding up to 5 1/4 Inch nested and base molding up to 6 1/2 Inch vertically against the fence while easily sliding out of the way for bevel cuts
• Cross Cut Capacity Up to 2x8 Inch Dimensional Lumber at 90° and a 2x6 Inch Dimensional Lumber at 45°
• Machined Base Fence support maintains fence perpendicularity with blade for cutting accuracy
• Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown molding laying flat with 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
• Includes a carbide blade, dust bag, blade wrench, vertical clamp and comfortable side handles in the base

 

 

• DEWALT brushless motor in both units that delivers up to maximum run time
• Li-Ion batteries with fuel gauge provide 33% more capacity over standard packs
• ScrewGun offers maximum speed and control and high torque capability for wide range of applications
• Cut-out Tool offers a 26,000 RPM motor, with tool-free bit change
• LED light on both tools

 

 

• Dual-grip variable speed trigger gives users ultimate speed and application control
• Bright LED light illuminates dark work surfaces for accurate cutting
• Universal accessory adapter for use with most oscillating tool accessory brands
• Part of the 20V MAX system

 

 

• TOOL USES: Convenient sizes for plumbing, electrical, and door-lock installation tasks
• DEEP CUT STYLE HOLE SAWS: Deep-cut style hole saws for improved efficiency and versatility
• DURABLE: High-speed steel height and double-tooth design for increased durability
• HARDENED BACKING PLATES: Hardened backing plates to prevent warping and thread stripping
• INCLUDES: 11 hole saws, a small quick-change mandrel, a large quick-change mandrel, replacement parts, and case

 

 

• 1000 Watt power inverter delivers serious power you can transport using dual 120 volt AC outlets and 3, 3.1 Amp USB charging ports
• Perfect for charging electronics such as laptops, power tools, and other electronic devices on the job site
• Features an LCD screen showing real-time information on status of power consumption, battery status, and any fault issues
• Slim aluminum housing and integrated grommets for easy mounting and installation
• Battery connectors and mounting hardware included; 12V DC accessory adapter not included.Frequency:60
• Fit Type: Universal Fit

 

 

• 1 Year warranty on material and workmanship
• This product meets customer requirement
• Product is manufactured in Mexico

 

 

• Brushless motor for extended runtime and durability
• Active Vibration Control which significantly reduces vibration
• 2.1 Joules impact energy which provides corded power without the cord
• Retractable utility hook for convenient hanging and storage
• No Load Speed 0 - 1,100 rpm. Optimal Concrete Drilling-5/32 - 1/2 inch. Chuck Type-SDS+. Blows/Min- 0 - 4,600 bpm
• Battery & Charger Sold Separately

 

 

• Brushless motor for efficient performance and runtime
• 2. 1 in. orbit diameter and 5 in. backing plate recommended for most applications
• Speed range of 2000-5500 OPM for all types of applications
• Variable speed on the trigger and dial helps to better control the tool during every step of the application
• Rubber gear case overmold reduces surface imerfections and improves gripping surface

 

 

• DEWALT brushless motor which delivers up to 57% more run time
• (2) XR Li-Ion batteries with fuel gauge provide 33% more capacity
• Compact, lightweight design for tight spaces
• High speed transmission with 2-speed settings
• 3-Mode LED lights with a spotlight mode

 

 

• Sturdy 9 gallon wet/dry Vac ideal for large pick-up applications 9 gallon Poly container
• Powerful 5 peak horsepower motor provides just the amount of suction needed to most any cleanup job
• Ultra durable rubberized casters allow smooth swiveling for ease of movement
• 10' Power cord with cord wrap helps reach almost any cleanup need
• Built-in blower port powerful enough to blow Sawdust and debris from most any workshop
• Built-in accessory storage bag conveniently attached to the backside of the vac to keep all accessories neatly organized
• Large built-in tank drain makes it easy to remove liquids picked up

 

 

• 0V MAX XR Cordless Lithium-Ion Brushless 3-Speed Hammer Drill - DCD996B
• Heavy-Duty 1/2 in. Ratcheting nitro-carburized metal chuck with Carbide inserts for superior bit gripping strength
• LED spotlight mode features 20 minute shutoff function allowing for extended work time in dark or confined spaces
• 20V MAX XR Cordless Lithium-Ion 1/4 in. 3-Speed Impact Driver - DCF887B
• Precision drive in speed 1 for precision applications and added control

 

 

• Dewalt-built Brushless motor for efficient performance and runtime
• 7 in. Backing plate recommended for most applications
• No-load speed of 800-2200 RPM for all types of applications
• Variable speed on the trigger and dial helps to better control The tool during every step of the application.Spindle Thread:5/8 inch - 11
• Rubber gear case over mold reduces surface imperfections and improves gripping surface